Tech Controllers EU-281, Руководство пользователя

Страница: 17 / 24

Tech
17
PIN Code
In order to set the PIN code (necessary for regulator
operation when the lock is active - you must click PIN code
icon
NOTE
The factory set PIN code is "0000".
V.c) Screen
After clicking on the Screen icon on the main menu you will see the panel used for changing the
screen settings.
Screensaver
On the controller, it is possible to set the screensaver which will activate after a fixed idle time. In order
to return to the main screen view it is enough to touch any place on the screen. The user may adjust
the screen view during the screen time-out by setting particular parameters:
 Screensaver selection
By clicking selection of the screensaver you switch to the panel which enables you to turn off the
screensaver option (No screensaver), or set the screensaver in the form of:
- Clock – the screen displays the clock.
- Blank – after the pre-defined time of inactivity the screen goes blank.
- Blanked only at night - the screen will go blank at nighttime.
 Idle Time
This function enables you to set the time after which the screensaver will activate.
Screen View
After clicking on the screen view icon the user has the
ability to set the appearance of the main screen. By
default it is set to the pre-installed screen, but you can
also set the panel screen.
Night from hour/Day from hour
In further sub-menus of the screen menu you can decide which hours the controller will switch to the
night mode (Night from hour) as well as return to the day mode (Day from hour).
Brightness during the day/brightness at night
After clicking on the icon, the user may set the percentage value of the screen brightness during the
day and at night.