4. Plug the power adapter into the wall socket.
5. Connect the power adapter with the HDMI selector.
6. Turn on the monitor first.
7. Turn on the DVD player/TV receiver.
Operation
1. Port selection
Press the button of “port selection switch” for
accessing the wanted DVD player/TV receiver.
The selected corresponding port will light on for the
LEDs which indicating the port is activated.
-2-
2. IR remote control
Use “1” ~”7” key to select video input port.
Use “◄”, “►” key to select another video input port.
Use ”
” key to power on/off.
Support HDMI mode
Max resolution:
UXGA(1600x1200@60), 1080p@60, 12-bit.
Support VGA mode
Analog
Resolution
Frequency(Hz)
VGA
640x480
60 / 72 / 75 / 85
VGA
720x400
70 / 85
SVGA
800x600
56 / 60 / 72 / 75 / 85
WVGA
848x480
60
XGA
1024x768
60 / 70 / 75 / 85
SXGA
1152x864
75
SXGA
1280x768
60RB/ 60 / 75 / 85
WXGA
1280x800
60
SXGA
1280x960
60 / 85
SXGA
1280x1024
60 / 75 / 85
WXGA
1360x768
60
SXGA+
1400x1050
60RB / 75
WXGA+
1440x900
60
SXGA+
1440x1050
60
UXGA
1600x1200
60
WSXGA+
1680x1050
60
1080p
1920x1080
60
WUXGA
1920x1200
60RB
720p
1280x720
60
Support YPbPr mode
Analog
Resolution
Frequency(Hz)
480i
720x480
60
576i
720x576
50
480p
720x480
60
576p
720x576
50
720p
1280x720
50 / 60
1080i
1920x1080
50 / 60
1080p
1920x1080
50 / 60
-3-
Support CVBS/ S-Video mode
Analog
Resolution
Frequency(Hz)
480i
720x480
60
576i
720x576
50
Matrix Application Software
Software Introduction
The
《
AV Matrix
》
Matrix control software applies to
different input/output matrixes.
Software Activation
Power on the computer: Implement the
AV Matrix.msi
to
activate installation screen as below, click
“Next”
. And
follow the instructions on screen to finish the installation.
Connect Multi-Format to HDMI Conversion Box and PC
You must power off the Multi-Format to HDMI Conversion
Box. Then, connect the RS-232 port to the PC
’s RS-232
port.
Matrix Configuration
After finishing installation, click
to active
AV Matrix Application. In the
“Options”
screen, select the
connected PC Port number and Baud rate, and then click
“OK”
.
-4-
Press the “Scan” and found the connected Multi-Format to
HDMI Conversion Box first.
Then use mouse cursor to select which input port to switch,
and press the left button
Communication Protocol/Control Command Code
Communication Protocol:
Baud rate 9600bps, no odd or
even calibration bit address, 8bit transmission address,
1bit stop address. Please refer to the
“Command list.pdf”
in the CD-ROM for more relative
Command Code
information.
