NOTEWORTHY NOTES & SUGGESTIONS
--
You need not set everything at max to get maximum results.To get
started right out of the box, we recommend setting all controls at
12 o’clock.
--
For a clean boost, turn the compression to minimum (7 o’clock).This
will enable you to kick in up to 6dB of volume without altering the
tone of your bass.
--
When using acoustic, semi-acoustic or hollow body instruments, be
aware that too much compression may cause the body to resonate
and feed back. Simply decrease Comp as needed.
--
If you should want distortion and overdrive, consider our SansAmp
Bass Driver DI. If you’re looking for mega distortion and overdrive,
consider using our XXL stomp box with a SansAmp Bass Driver DI.
--
If you want more sophisticated EQ, consider our SansAmp Acoustic DI.
--
The LED will fade as the battery runs low.
USING THE BASS COMPACTOR
WITH OTHER EFFECTS
In most cases, the best results will be achieved by plugging your
instrument directly into the Bass Compactor --even when using it with
a SansAmp.The Bass Compactor should, however, come after an
envelope filter (auto-wah) or other dynamically-controlled effect.
SAMPLE SETTINGS
Peak Limiter
(Amp Saver)
DI Recording
Bass Solo
LEVEL
HIGH
LOW
COMP
Mid Booster
LEVEL
HIGH
LOW
COMP
LEVEL
HIGH
LOW
COMP
Tone Booster
LEVEL
HIGH
LOW
COMP
LEVEL
HIGH
LOW
COMP
