TECE TECEone, Руководство по эксплуатации

Страница: 8 / 9

17
5. Troubleshooting
The TECEone has been built in such a way that problems are extremely unlikely
and may only occur in very few cases. However, if a fault should occur, it is gen-
erally best to contact a suitable specialist (i.e. fitter).
Problem Possible cause Solution
Water is running/dripping out
of the ceramic.
Close the corner valve (see
illustration below) or the main
valve and call the fitter.
The shower nozzle does not
extend.
The water pressure is too
low.
Call the fitter.
The shower jet is too weak. The water supply hose is
bent.
Call the fitter.
The shower nozzle or
shower arm is blocked/cal-
cified.
Clean the shower nozzle or
arm with a suitable brush or
replace it in case of limescale.
No water comes out of the
shower arm.
The water supply has been
switched off.
Check whether or not the
corner valves are turned (see
illustration below) or check
the central water feed supply.
The temperature of the water
is suddenly too high or too
low.
The temperature cartridge
is faulty.
Call the fitter.
Position of corner valves:
EN