Sandpaper
12pcs
Dustbox
1pc
For cleaning, deburring, smoothing, and sanding metal, wood, and plastic surfaces. Effective
removal of corrosion and surface contamination. Finish on metal surfaces. Smoothing wood
surfaces, removal of wood fibres before and after priming.
The unit is designed exclusively for non-commercial use to dry-sand wood, metal, plastic, plaster
and varnished surfaces. The appliance is not suitable for sanding plaster-based substrates.
SPECIFICATIONS
Model
Motor:
120V/60HZ 1.6A
No load speed:
15500R/MIN
Papertype:
Hook & loop
OPERATING INSTRUCTIONS
INSTALLING AND REMOVING THE ABRASIVE DISC
CAUTION
For your safety, always turn off the switch and unplug the sander from the power source
before performing any maintenance or cleaning.
Replacement Sandpaper
Uses universal Velcro 3 7/8 in. x 5 1/2 in. detail sanding sheets with hook and loop backing found
in most home improvement stores. Sanding sheets can have holes, removable discs or slots.
To Remove.
- 04 -
Unplug the sander.
Remove all sanding dust or dirt from the sanding pad fig. 2
Align the holes on the abrasive disc with the holes in the sanding pad, making sure that the pad
is centered and the edges are aligned with the edges of the sanding pad.
Note:
The holes in the abrasive disc must line up with the sanding pad holes for the dust
collection system to function properly.
Press the abrasive disc to the pad.
1.
2.
3.
4.
Unplug the sander.
Peel the disc off the sanding pad.
1.
2.
Fig.2
