7. Maintenance and Cleaning
7.5.3 Rinse:
Night
This procedure is used to thoroughly rinse the wash solution system and leave
the manifold soaking in the waste sink full of solution at the end of operation. This
procedure requires distilled water.
Confirm rinsing solution and tube in bottle
Select and confirm Night Rinse procedure
Select required channel (1 - 4)
Rinse: Night
- + other yes
Night: CH1
- + exit yes
Rinse Solution ?
exit yes
Waste Bottle OK?
exit yes
Confirm waste bottle is empty
Soaking xx sec
Stop
The waste sink is filled with the distilled water
and the manifold is lowered into it.
Manifold left in solution for set soak time (1 min)
Rinse ChX YY sec
Stop
Wash system rinsed for set rinse time
Soaking
Stop
Manifold left in solution until
Stop
key pressed
Run XX:yyyyyyy
- + other yes
Standby mode
Washing procedure can be performed
Rinse ChX YY sec
Stop
Wash system rinsed for set rinse time
The waste sink is filled with the distilled
water and the manifold is lowered into it
7.5.4 Rinse:
Auto
This procedure is the same as the Rinse: Day procedure, except that the rinsing
procedure is automatically repeated after a set repeat time. The repeat time can
be set in the Adjust menu between 1 and 24 hrs.
7-12
Instructions for Use for Columbus Washer No. I 109 006 Rev No. 2.2
May 2003
