Step 6
Dispense a physically measured quantity
of oil into a graduated jug, greater than
3 Litres – 5 litres is recommended.
Press and hold the ‘TOTAL’ button to select
if the quantity of oil displayed needs to be
increased or decreased.
Press or even hold the “RESET” button to
adjust the value so it coincides with the
actual delivery quantity as shown on the
measuring jug.
Press and hold down the “TOTAL” button
to confirm and save the updated calibration
value to the memory.
Step 5
Press the ‘RESET’ until the desired choice for
Flow Direction is displayed, then press and
hold the ‘TOTAL’ button to save and enter the
‘Calibration’ screen is shown in Step 6.
Step 5
Step 6
Calibration
Instruction Guide
