TJ UV Printer User Manual
3.4. Adjust the cap station
The cap station must conect well with the print head bottom surface to suck the ink out from the ink damper and print head
during load ink and print head cleaning at the next chapter.
1.
Normaly we had adjusted the cap station already before delivery, but the position may changed during rough delivery , so we
need to check first, power off the machine, then move the carriage to the right end that can not moved anymore, then check if
the print head get suround by the around cap sation rubber or not.
Print head surface edge
Cap rubber edge
×
(Wrong connection! Have gap and not suround edge covered well!)
√
(Correct connection with round all suround during print head can cap rubber)
24
