![TEC ST-71 SERIES Скачать руководство пользователя страница 17](http://html1.mh-extra.com/html/tec/st-71-series/st-71-series_maintenance-manual_4051848017.webp)
2. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
EO18-12010
2.3 Installing the Line Display, Pole Unit, and VFD Stand
2-11
•
Installation Procedure
(when installing the Line Display with the VFD Stand)
1)
Remove the Rear Cover. (Refer to
Section 2.1 Installing the Hard Disk Drive (HDD)
.)
2)
Remove the two Hinge Holders from the Rear Cover. (Refer to
Section 2.2 Installing the LVDS PC Board
and Back Indicator Unit
.)
3) Remove the Front Cover and Side Cover (L). (Refer to
Section 2.2 Installing the LVDS PC Board and
Back Indicator Unit
.)
4)
Remove the four screws, then remove the VFD Frame from the VFD Stand.
5)
Insert the VFD Cable and the axis of the Line Display into the VFD Stand.
6)
Fit the Stopper onto the axis of the Line Display.
NOTE: Before placing the Line Display so that the front side faces down, set a soft cloth on a table. Failure
to do this may cause the display to get scratched.
Line Display
VFD Cable
VFD Stand
Stopper
VFD Frame
VFD Stand
T-3x8 Screw