Page 12
Version 1.0 eng
-
Before accessing the telescopic ladder, check whether
the suction cups have taken hold. Check at regular
intervals during use that the
suction cups are still
holding.
-
To release the vacuum,
throw the levers back to
their home position.
Attention
! Special care
due to danger of pinching!
-
Carefully lift the vacuum
suction from the side.
-
To remove, pull the
Leitertec-System© (1)
upwards and turn outwards by 90° respectively.
Using on rough surfaces
The felt pads act as a surface protector.
-
Lay the felt pad on the suction cup so that it is flush all
around. When doing this, the smooth surface of the felt
pad must be in contact with the rubber and the felt
must point away from the suction cup.
-
Actuate the suction cup by throwing the lever.
-
Check that the felt pad is correctly attached to the
suction cup
-
Proceed as described above
Содержание KME 1020
Страница 1: ...Version 1 0 eng Operating instructions...
