7
Safety, warnings and troubleshooting information
• Follow all safety instructions provided when used with any TEC products.
• Do not operate the gauge if any liquid gets inside the gauge and contact TEC
• A hard reset may be performed by holding down both silicone buttons until the
gauge powers off. This is only advised if holding the power button alone does not
power off the gauge or gauge is unresponsive.
Lithium Ion battery safety and warnings
• The battery should only be charged in conditions between 32° and 115° Fahrenheit
(0° and 45° Celsius).
• Do not leave the gauge in direct sunlight or in an area heated by sunlight. The
battery could generate heat, smoke or flames.
• Do not use the battery when there is rust present, the battery has a bad smell or if
the battery is damaged in any other way.
• Keep the battery out of the reach of children and animals.
•
If fluid from the battery leaks out and makes contact with skin, wash with soap
and water. The fluid may cause irritation. If this happens please see a doctor
immediately.
•
Do not expose the battery to extreme heat, flames or liquids.
• Do not modify or disassemble the battery as this could result in leakage or
explosion.
Screen care
•
To clean the screen, use a microfiber cloth.
•
Do not clean the screen with flux, water, acetone, ethanol, isopropyl alcohol,
toluene or ammonia (glass cleaner).
