BlowerDoor Standard
January 2022
15
2.3.1
Installing the DG-1000 using USB-C port
Use of the USB-C port requires you to first download from the Internet and install the appropriate USB
device driver to the computer.
Required for installation:
•
DG-1000
•
USB data cable (USB 2.0 or above)
•
Laptop/computer with internet connection
Installing the USB device driver:
•
Make sure the computer is connected to the internet.
•
Windows Update on the computer must be configured to allow downloading and installation of
driver software.
Fig. 2.2
•
Turn on the DG-1000 pressure gauge by pressing
and holding the power button for approx. 3
seconds until the green power indicator light
turns on, and wait until the DG-1000 is booted.
The bootup process may take some seconds to
complete, and the gauge is ready to be used
when the home screen appears (shown below).
Fig. 2.3
•
To enable the USB-C port on the DG-1000 gauge
touch “Settings” on the home screen.
