12
January 2022
BlowerDoor Standard
2
Installation
2.1
System Requirements
Operating system
TECTITE Express software and drivers run on computers with the full versions of the following
operating system:
•
Windows 7
•
Windows 8
•
Windows 10
•
Windows 11
Computer
The computer/notebook/laptop must meet the following requirements:
•
Pentium 233-MHZ-Processor
•
512 MB RAM
•
Internet connection for the installation of USB device driver of DG-1000
•
USB port (2.0 or above) or Ethernet port or WLAN interface
•
The connected computer is required to comply with IEC 60950-1 or equivalent standards on data
port electrical safety isolation.
2.2
Installing TECTITE Express
TECTITE Express is a steering program. With it, you can control the BlowerDoor measurement system
over a computer as well as conduct automated tests.
For the automated and semi-automated BlowerDoor measurement, you also need to install the
differential pressure gauge DG-1000 (
→
Chap. 2.3) in addition to the TECTITE Express software.
The software installation is performed in the following steps:
•
After the software download, double-click the file
“TECTITE Express
Version
Setup.exe”
. to start
the installation.
•
Follow the instructions of the installation program.
