5-47
EO18-33002A
5. DIAG. TEST OPERATION
5.4 TEST PRINT MODE
P R
N T
C O N D I T I O N
I
Press the [PAUSE] key.
< 3
T E S T
P R I N T
>
Press the [PAUSE] key.
< 3
T E S T
P R I N T
>
From of the preceding page.
B
From
of the
preceding page.
A
Select the test print from
those at the right by
pressing the [FEED] key
or [RESTART] key.
A designated number of
test prints are issued when
pressing the [PAUSE] key.
(See NOTE 7.)
CHARACTERS
BAR CODE
AUTO PRINT (TRANS.)
Color bar print
SLANT LINE (1DOT,3DOT)
K : BLACK
Process test print/
Transmissive sensor
AUTO PRINT (REFLECT.)
Process test print/
Reflective sensor
M : MAGENTA
C : CYAN
Y : YELLOW
Press the [FEED] key
and [RESTART] key at
the same time.
CB-416
1 : 1st print head
2 : 2nd print head
CB-426
NOTES:
1.
When there is no change to the print condition, select one of the test print options
to issue the test print.
2.
Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds
enables a fast forward.
3.
A selected print condition is activated when the [PAUSE] key is pressed.
4.
When the feed gap sensor is selected, the gap between labels becomes 2mm long.
5.
A label size greater than the image buffer length cannot be designated. The image
buffer length differs according to memory size. If designated, the printer prints in
the image buffer, or the printer stops because of an error.
6.
Pressing the [FEED] key changes the label length -1 mm, pressing the [RESTART]
key c1 mm.
