TebasLED Pool bulb - Manual Instruction
EN
IMPORTANT:
The manual contains important safety information during installation and start-up. Please read this manual before installation and keep it in an accessible place.
1. APPLICATION:
The bulb is designed for installation in all types of pools: liner, concrete and also polyester. Designed for installation in the standard PAR56 niche.
2. BOX CONTENT:
- bulb
- instruction
3. TECHNICAL DATA:
Voltage:
12V
IP Class:
IP68
Lifetime:
50.000 hours for LED, 1.000 hours for halogens.
Cable dimensions are given for a maximum distance of 6 meters
.
4. DIMENSIONS:
5
Disconnect the power supply before proceeding with the installation. The assembly should be made by a qualified person. Make the assembly of the lamp
niche.
Make the cable electrical connection. Leave 1.5 m of the cable in the
niche
so that you can carry it out at the edge of the pool if you change the light bulb. Place the bulb in a
niche.
Mount the remaining elements
(includes with
lamp). Mount the frame and screw it with screws.
Bulb replacement:
Disconnect the power supply. New bulb should have same characteristic as changed one. Remove the frame. Make electrical cable connection of new bulb.
O-ring should be replaced together with bulb. Place bulb into the niche. Screw the frame.
. BULB ASSEMBLY:
6
7. WARRANTY CONDITIONS:
. SAFETY WARNINGS:
Code
24850
24880
24881
24882
24883
24884
Name
Halogen bulb
TebasLED bulb
TebasLED MAXI bulb
TebasLED RGB bulb
TebasLED MAXI RGB bulb
TebasLED bulb
Power
300W
14W
30W
20W
18W
18W
Lumens
2000
1080-1180
2200-2400
650-720
870-920
1500-1650
LEDs Qty.
-
14 SMD
60 SMD
252
18
252
Light
white warm
white cold
white cold
color
color
white warm
Cable
2x4 mm
2x2,5 mm
2x2,5 mm
2x2,5 mm
2x2,5 mm
2x2,5 mm
Terminals
-
2 AC
2 AC
2 AC
2 AC
2 AC
9
7
,9
2
5
,9
Mo
unting should be done by a qualified person. The electrical connection should be made by a qualified electrician
.
The bulb can not be
"
run dry". It is intended only for running in a pool filled with water
.
When delivering goods, make sure that it has not been damaged in transport
.
Make sure that the throttle is fully tightened. The product can only be installed in the PAR56
niche.
The front glass of the bulb may break if you let the water completely out of the pool at a temperature below 5°C.
The front glass of the bulb may break in the event of a fall or excessive tightening.
Do not install the product if the electric cable is damaged. Otherwise damage to property, body or even death may occur.
Do not use the product in places where an electric leak may occur.
Make sure that the voltage is not higher than 12V. Otherwise, the manufacturer is not responsible for the product's lifespan.
The product may malfunction in case of voltage fluctuations. In this case, the product is not covered by the warranty.
Do not use the bulb without grounding and electrical protection
.
Make sure that all electrical power has been disconnected before servicing or replacing the light bulb
.
The bulb should be completely removed from the water during maintenance or replacement. Do not operate the device with wet hands
.
The manufacturer is not responsible for electrical devices that are not designed to work with a light bulb and for
related adverse actions.
The bulb should only be installed in non-combustible materials. The light bulb should not be used when its light-emitting part is covered with something.
The product should only be used with a pool transformer.
Do not look directly at the light bulb while it is operating
.
Do not use products such as alcohol or gasoline for cleaning
.
In the event of a failure, if you do not have the qualifications to repair the device, please contact the specialist technical service.
Accident prevention standards must be complied with
.
The pH of the pool water should be between 7.2-7.6. The bulb is resistant to chemicals if it does not exceed the following concentration values: chlorine 2 g/l, bromine 5 g/l,
sodium chloride (NaCl) 6 g/l.
The warranty period is 6 months from the date of purchase.
In the event of breakdowns occurring during the warranty period, all repair costs, if reasonable, shall be borne by the Seller
.
The
S
eller returns the payment to the customer or provides a new product if it is not possible to repair.
The warranty period does not start again after the
bulb
has been repaired or replaced; continues from the original date of purchase.
The
B
uyer must provide a purchase document to meet the warranty conditions
.
The
B
uyer must prove the product is missing or not compliant with its demand if more than one month has elapsed from the delivery of the product to the
Buyer.
I
nstallation, use and electrical connection must be carried out in accordance with the instructions, so that the bulb is covered by the guarantee.
Starting the bulb "
run
dry" will invalidate the warranty. Using the light bulb inconsistently with its intended use will void the warranty
.
Damage resulting from improper assembly and operation is not covered by the warranty.
The
claimed
bulb must be delivered to the Seller at the expense of the
Buyer.
If there is a need to deliver a light bulb to the manufacturer, the transport costs shall be borne by
the Buyer
.
The guarantee is granted by the Manufacturer, not the Seller.
In the event that the product was improperly stored, cleaned, repaired by unqualified persons or using unoriginal parts or was used contrary to its intended use, the warranty is voided.
-
this failure is not covered by the warranty.
Product used at temperatures lower than 5°C and above 50°C is not covered by the warranty.
By purchasing a product, you accept the terms of the warranty.
The manufacturer is authorized to make a decision about the nature of the fault.
The warranty ceases to apply in the event of improper assembly, operation, maintenance and electrical connection.
The front glass of the bulb may break if you let the water completely out of the pool at a temperature below 5°C
NEUTRAL
GREEN
NEUTRAL
RED
GREEN
BLUE
