Teba TP-10, Руководство по установке

Страница: 10 / 15

10
4.4 Menu
Push P2 button to enter in the User Menu
Using P3 and P4 buttons it is possible to select the desired Menu or Submenu. Push P2 button to
enter in desired Menu or Submenu.
To decrease or increase value push the buttons P3 or P4; to save the new vale push the button P2; to
cancel the modifies and restore the old parameter’s value push the button P1.
If a parameter value is changed, the new value is sent to the control board; if the transmission
failures appears the message “Transfer not successful”: in this case modify again the parameter’s
value.
4.4.1 Combustion(Working) Power Menu
In this menu is possible to modify the combustion power of the system. It can be set in modality
automatic or manual. In
the first case the system chooses the combustion power. In the second case the user selects the
desired power.
On the left side of the Display are signalled the combustion modality (A=automatic combustion,
M=manual combustion)
and the working power of the system.
4.4.2 Heating Power Menu
In this menu is possible to modify the heating power. It can be set in modality automatic or manual. In
the first caIf the
system chooses the combustion power. In the second case the user selects the desired power.
On the left side of the Display are signalled the heating modality (A=automatic, M=manual) and the
related power.
4.4.3 Working Thermostat Menu
Menu used to modify the value of the main thermostat
4.4.4 Chrono Menu
Used to program and activate the ignitions/extinguishing of the system.
4.4.4.1 Activation
Used to activate or deactivate the set programs.
4.4.4.2 Programming
Select the day of the week to program and set the ignition and extinguishing