Teba therm TPW-23, Руководство пользователя

Страница: 6 / 33

Page 6 / 33
1.2 USE
1.2.1 Switching ON
The screen will be black and empty when the device is OFF. By long ( 1 sec)
pressing of the button, the device is switched on, the screen lights up ( a
temporary logo screen may appear depending on the software version ) and the
idle screen will be visible. The oven controls are enabled now. To switch the
device OFF, a long press of the same button is required. In that case, any
running cooking program will be cancelled.
INFO: When no cooking or cooking program is in progress, the brightness of
the screen will be reduced automatically after 1 minute following the last
button press.
Mains Power Losses:
Your oven control will not be affected from mains power interrupts shorter than
2 minutes. Longer power losses will cause the oven to get OFF, any adjusted
cooking or alarm will be cancelled. Upon power restore after a long loss of
power, the device will be in idle mode when it was ON , in OFF mode when it
was OFF before the mains power interrupt .
INFO! Upon first installation or after a power loss lasting longer than 48
hours, the date and time of day settings will not be correct. Please set/correct
them using the SETTINGS menu.
The idle Screen
The idle screen is defined as the screen appearance as no cooking program is in
progress and the time of day and date are shown. Any of the symbols , ,
or , not related to cooking may also take place on the idle screen .