background image

 

 

2. GENERAL INFORMATION  

 

National Standards, European Standards, local regulations, construction 

regulations, fire protection and safety regulations must be observed.  

During the installation, one must contact a person who is authorized for the 

chimney. The authorized person shall check the shape of the chimney connection 

of the product in the prescribed directions. In addition, the product installation 

and installation connection must be made by an authorized person. Before 

installing the stove, the lifting capacity of the installation ground should be 

checked whether it is resistant for the stove. In case of insufficient load resistance 

or low lifting capacity, suitable precautions must be taken (eg put a stove lifting 

plate).

 

 

3. SAFETY  

 

THE VENTILATION CONDITIONS WHERE THE PRODUCT WILL BE INSTALLED 
AND THE PROTECTION AGAINST FREEZING MUST BE TAKEN INTO 

CONSIDERATION.  

All the required standard examinations are tested for the product. The predicted 

parameters associated with combustion efficiency and exhaust gas emissions are 

observed. The stove type described in this manual has been tested according to the 

BA 1, DIN 1881 EN13240 standards, by an approved agency.  

Combustion chamber cover should be opened only to load the fuel. To avoid 

hazards, the combustion chamber must be closed.  For the efficient operation of 

the stove, there must be minimum of fresh air flow in the room where it is 
installed. 

 

CAUTION! The stove  can operate in conjunction with the existing multiple 

flue systems. This should not be an aspirator, ventilator etc.

 

The combustion of combustible materials causes heat energy to heat the stove 

surfaces (doors, door handles, flame monitor cover, side walls, front wall). These 

parts should not be touched without heat-protective gloves. 

 

CAUTION! Since the stove top surface might be hot, please do not put 

combustible materials on it. 

 

Содержание T-25















Отзывы: