ThermalCapture Fusion – User Manual
4 Configuration
Before ThermalCapture Fusion can be used in a specific setup, it is necessary to configure the
TAU core correctly. Configuration of ThermalCapture Fusion is only needed if the serial input (see
chapter 3.3.3) is used to connect to a GPS receiver or a similar device.
4.1 Configuration of the TAU Core
TAU core configuration is only necessary if you have mounted ThermalCapture Fusion to a TAU
core on your own, or if you want to change some core related settings. If this is not the case,
please proceed with chapter 5.
4.1.1 Driver Install
ThermalCapture Fusion uses a virtual COM port to connect the TAU core to the Mini-USB
interface. To get access to the TAU core with your PC, you may need to download and install the
STM32 virtual COM port driver from
STM32 Virtual COM Port Driver
After installation the TAU core is connected to a virtual serial interface (COMX). Please open the
device manager and look which COM – interface it has got.
9 / 15
