12
This product will enter standby mode automatically after riding is stopped for 3 min, as shown
in the figure below. It will return to the previous interface automatically after riding starts
again.
Standby Mode
7.2 Bike Computer Mode
This product will seek to connect with Tahuna after it is started, as shown in the figure below;
if you do not want to connect with Tahuna or Tahuna has stopped working, you can press the
far left button to EXIT and enter bike computer mode.
If Teasi Core has connected to Tahuna successfully and is in app working mode currently, users
can disconnect the sensors in the sensors page of Tahuna to return to the searching mode;
then select EXIT to exit and enter the independent working mode of the bike computer.
At this moment, it is needed to pair speed/cadence sensors and heart rate monitor and
connect them. The sensors connect automatically when they are activated and found. The
sensors connect automatically when they are ready for operation and active.
Speed & Cadence Sensor: The magnets must pass the sensor surfaces to activate the sensor.
Heart rate sensor: Must have secure skin contact with lightly moistened contact surfaces.
Connection for speed/cadence sensors or heart rate will be shown on the upper right symbol
on the display:
S
Speed/cadence sensor is connected
H
Heart rate sensor is connected