33
Trigger plug connection
The trigger control connector should be wired according to the following scheme
To check the cabling of your torch if you want to use a torch of another company (not delivered by
GYS).
TIG DC welding
•
In order to use Tig DC welding, put the selector 1 to the position DC and the selector 2 to one of
the 2 positions Tig TSL or HF, according to your choice .
•
In order to weld steel, the position DC should be used the following way with a sharpened electrode:
= 3 x d for weak current
= d for steady strong current.
DC choice guide
TIG AC welding
•
In order to use TIG AC welding, put the selector 1 to the position AC or AC easy and the selector 2
to one of the 2 TIG TSL or HF according to your choice, to adjust the balance and the current
according to the diameter of the used electrode, as well as the frequency according to the desired
Connect wires of
contact normally
opened on the
studs
ENGLISH
INSTRUCTION MANUAL
Current (A)
Ø Electrode (mm)
= Ø wire (supporting metal)
Nozzle Start
(Argon l/mn)
... 10-80
1,6
9,8
5-6
2-5 70-140
1,6-2
9,8 6-7
4-6 140-180
2
9,8-15,7
7-8
