•
the pressure regulator is set for the gas pressure of the local state.
•
Regulator outlet pressure is in line with the gas pressure of the local state.
•
Never attempt to attach this appliance to the self-contained LP gas system of a camper trailer,
motor home or house.
•
Always use the pressure regulator and hose assembly provided with the appliance to connect
to a LP gas cylinder. Never connect to an unregulated LP gas supply.
•
Contact your retailer’s customer service department for replacement parts.
•
Hand turn the manual gas control valve. Never use tools. If the valve will not turn by hand, do
not try to repair it. Call a certified gas technician. The use of force or any self attempted repair
may result in a fire or explosion.
•
Use only the type of gas and the type of LPG cylinder specified by the manufacturer.
•
Appliance is fitted with gas regulator, flexible gas rubber pipe and clamps according to the
National Rules in force of the country of destination.
•
Appliance must use an approved gas regulator (approved for a working temperature not lower
than 50 ˚C) according to the EN Standard
flexible gas rubber pipe according to EN 16436-1
(with proper inner diameter according to gas inlet connection and National Rules in force)
with a length not over 3.0 m and approved for a
working temperature not lower than 60 ˚C.
When substitution will be necessary , you have to purchase suitable gas regulator, flexible gas
gas regulator should be substituted not
•
Flexible gas rubber pipe must be carefully , avoiding any twisting. Never use a damaged
gas regulator.
•
Never connect this appliance to an unregulated LPG source (gas regulator is mandatory to
be used).
•
When the appliance is not in use, turn the LPG cylinder in “OFF” position.
•
Always perform a leakage test on gas connections whenever a LPG cylinder is connected.
If bubbles form in Flexible gas rubber pipe must be located in the LPG compartment carefully,
avoiding any twisting.
•
Never use a damaged gas regulator.
•
Always perform a leakage test on gas connections whenever a LPG cylinder is connected.
If bubbles form in the leakage test solution, do not use it. Never use a flame to test for leakages.
It is strictly forbidden and dangerous!
•
to change the gas cylinder in a amply ventilated area, away from any ignition source.
•
Place dust cap on valve outlet whenever the LP gas tank is not in use. Only install the type of
dust cap on the LP gas tank valve outlet that is provided with the LP gas tank valve. Other types
of caps or plugs may result in leakage of propane.
•
Do not store a spare LP gas cylinder under or near this appliance.
•
Never fill the LP gas cylinder beyond 80% full.
•
If the information in (a) and (b) is not followed exactly, a fire causing death or serious injury
may occur.
•
LP gas cylinders should be filled only by a certified LP gas dealer.
• For use outdoors or in amply ventilated areas.
• An amply ventilated area must have a minimum of 25 % of the
surface area open. The surface area is the sum of the walls surface.
SAFETY INFORMATION
08
rubber pipe and clamps from your local gas dealer;
over 10 years.
