SAFETY INFORMATION
06
O
IF APPLICABLE:
• Allow heating item to cool completely before placing on lid.
• DO NOT use heating item while lid is installed. Always remove the lid while heating
item is in use.
Only use the regulator and hose assembly provided with this unit. Replacement parts
must be supplied directly by Teamson design corp.
Inspect the burner before use of this unit. If the burner shows any kind of damage, do
not operate the appliance. For assistance with repair or replacement of the burner or
any other parts, calls
+1(800)935-3959
.
NOTE: You must follow all steps to properly assemble this heating item.
Make sure the gas valve is turned “OFF” before assembling. Do NOT attempt to
assemble without proper tools.
Min. Clearance
48 in (121.9 cm)
Min. Clearance
48 in (121.9 cm)
Min. Clearance
48 in (121.9 cm)
Min. Clearance
48 in (121.9 cm)
Combustible materials should not be within
72 inches of the top of the unit, or within 48
inches around the entire unit.
