(4) Put the outlet into the outlet box and tighten the outlet
mounting screws.
(3) Follow the below installation steps to correctly guide the L, N
and G wire into the terminal block holes separately, and securely
tighten the screws.
①Loosen the screw, insert the power wire into the terminal block hole.
②When inserting the wire into the terminal block hole, please make
sure to insert the inner wire deeply to the bottom.
③Securely tighten the terminal screws after the power wire is inserted
into the terminal block hole.
●
Insert the L(Line/Hot),N(Neutral) and G(Ground) wires into the
terminal block holes separately, and securely tighten the screws.
●
Please follow the installation steps in the manual to install the product.
●
Before installing this product, please flip the front-end main power
breaker fully to the off position.
●
This product is for indoor use, please do not use it in humid or high
temperature environments.
●
Do not exceed the rated specifications of the product. The total
maximum load power of the two outlets is 1650W, and the maximum
current is 15A.
●
Stop using and replace it if the product is damaged, deformed, or
malfunctions.
●
Do not use chemical solvents, corrosive materials, cleaning naphtha
and bleach to clean the product.
●
Please read the product manual carefully before use to ensure safety.
We reserve the right of product improvement. Product performance and
description are subject to change without notice. For more detailed
product information, please visit our website.
https://www.teamyoung.com
Precautions for Safe Use
Package Contents
3-Prong Electrical Outlet
EzCon15x2-BS
Product Manual / Warranty
Product Appearances
3-Prong Electrical Outlet
Product Manual / Warranty
Country of Origin
Rated Voltage
Applied Voltage
Rate Current
Rated Power
Weight
Dimension
Radio Frequency
Standby Power
Load Type
15A Max.
433.92 MHz
(Refer Note 2)
Product Name / Model
Storage Temperature
Working Temperature
General Application
145 g
1 ~ +40 ℃
1. ON/OFF Switch Function
When power is on, the outlet is automatically switched on, and when
the power is off, the outlet is switched off. An optional remote controller
TX-RC-1 is available for remotely control ON/OFF of the outlet.
(1)When the outlet output is turned on:
(1)
When the electrical appliance has an abnormal phenomenon of
current overload or short circuit ; the output of the outlet will
be quickly switched off for protection.
2. Electricity overload / Short circuit protection
(2)When the outlet output / Curcuit breaker is turned off:
(2)
The reset procedure is to disconnect the overloaded or short-
circuited electrical appliance first, then switch off the front-end
main power breaker, and then switch on the main power
breaker again. If the LED indicator shows green (constantly
bright without flashing), it indicates reset completed and can
be used normally.
3-Prong Electrical Outlet / EzCon15x2-BS
125V AC / 60HZ
110V AC / 60HZ
1650W Max.
Less than 0.5W
Surge Protection
Meet the requirements of IEC 61000-4-5
(Refer Note 1)
Taiwan
L119.5 x W69.5 x H48.5 mm
Product Specifications
-20 ~ +60 ℃
Installation Steps of Outlet
LED indicator on: normal operation, the outlet output is on.
LED indicator off: The front-end power supply is disconnected,
turned off or the outlet output is switched off.
LED indicator flashes quickly: abnormal-short circuit protection,
the outlet output is off.
LED indicator flashes slowly: abnormal-overload protection,the
outlet output is off.
LED indicator on: normal operation, the outlet output is on.
1.Before installation, please make sure to switch off the front-end
main power breaker.
2.Connect the power wire
(1) Wire Gauge Requirement
It is recommended to use 14~12AWG (Φ1.6~2.0mm) solid copper
wire, and the use of stranded wire is prohibited.
Stranded
Wire
Solid
Wire
TEAM YOUNG TECHNOLOGY CO., LTD.
18F.-1, NO.400, HUANBEI RD., ZHONGLI DIST.,
TAOYUAN CITY 32070, TAIWAN (R.O.C.)
Tel : +886-3-2805160 Fax : +886-3-2805182
https: // www.teamyoung.com
Product Warranty
A.
The product with this warranty has one-year guarantee from the date
of purchase. But the warranty does not include the consumables.
B.
During free warranty period, any damage caused due to the following
situations will be excluded from the warranty. The ompany or
distributors may charge material and handling cost if the product
needs to be returned for repair.
a.
The installation or operation of the product does not follow the
instruction of the manual, or the unapproved accessories are used.
b.
The damage is caused by irritable natural disasters, pests or human
negligence.
c.
Damage caused by misuse, abuse, sabotage, poor on-site
temperature and humidity environment, failure to use power supply
according to the regulation on voltage/current, which makes the
product exceed the voltage and current load.
d.
Failure or damage occurred due to transportation, movement,
falling, or impact after purchase.
e.
Damage caused by dismantling products by non-distributors or
non-original manufacturer technicians.
f.
Use product in the special environments is not covered by the
warranty, such as high temperature and humidity areas, sulfur areas,
etc., which are prone to corrosion.
C.
This product has been insured with NT$100 million product liability
insurance in Taiwan provided by the Chung Kuo Insurance Co., Ltd.
＊This warranty will not be reissued. Please keep it safe.
＊The 5th to 6th codes of the Batch No. indicate the year of manufacture, for
example, the year of manufacture for 912-20XXXXXXXX is 2020.
Product Warranty Certificate
Product Model
Place of purchase
Seal of Distributor/
Manufacturer
Date of purchase
Batch No.
(Mfg. Code)
EzCon15x2-BS
Product Functions
Notes:
1.The surge protection abilities of electrical outlet:
Maximum Surge Voltage Absorption Capability: 2KV (1.2/50us)
Maximum Surge Current Absorption Capability: 1KA (8/20us)
Maximum Surge Energy Absorption Capacity: 175 Joules
2.If you need remote control function, optional EzCon remote controller
TX-RC-1 is available. One EzCon remote controller can control single
or multiple electrical outlets. Instruction of remote controller and more
product details, please visit our website. https://www.teamyoung.com
The recommended Wire
Strip Length:
16mm
16mm
(2) Disassemble the front cover of the outlet
①Loosen the screws
②Disassemble the front cover
Terminal block hole
Terminal block hole
The inner wire is not
inserted deeply into
the bottom.
The inner wire is
inserted deeply into
the bottom indded.
Terminal Block Holes
of L Wire (Line/Hot)
Terminal Block
Hole of G Wire
(Ground)
Terminal Block
Holes of N Wire
(Neutral)
Terminal Screw of L Wire
Terminal Screw of G Wire
Outlet Box
Terminal Screw of N Wire
L
(Line Wire)
(5) Reinstall the front cover of the outlet
①Replace the front cover
②Tighten the screws
3.After completing the installation, switch on the front-end main
power breaker.
After switching on the front-end
main power breaker, the LED
indicator will show steady green,
indicating that the outlet is ready
for normal use with outlet power
on and can be connected to
electrical appliances.
N
(Neutral Wire)
L
(Line Wire)
G
(Ground Wire)
MANUAL-52-V1
Side of Outlet
44.0mm
39.0mm
9.5mm
Front side of Outlet
Front Cover
LED Indicator
119.5mm
69.5mm
L
Line(Hot) Wire
N
Neutral Wire
G
Ground Wire
Rear side of Outlet
70.0mm
44.0mm
83.5mm
L
G
N
EZCON15X2-BS
額定電壓 / 電流 / 功率
Rated Voltage / Current / Power:
125V AC / 15A / 1650W Max.
遙控頻率 Radio Frequency: 433.92MHz
負載型式 Load Type: General Purpose
生產地 Country of Origin: Taiwan
製造批號 Mfg Code:
三孔牆壁插座 3-Prong Electrical Outlet
