Model
RC1007
Owner’s Manual
1
Welcome
This American Red Cross product has been carefully designed to give you peace of
mind while on the road. Please read this manual thoroughly before operating your new
American Red Cross product, as it contains the information you need to become familiar
with its features and obtain the performance that you need during a roadside incident.
Please keep this manual on file for future reference.
About the EMERGENCY LIGHT SET
The EMERGENCY LIGHT SET is designed to be used in the case of an auto incident to
alert other vehicles and traffic safety personnel of your disabled vehicle.
Location of Controls
Operation
Once batteries have been inserted the light is operated by pressing the On/Off Switch.
The light can be either flashing or steady. Pressing the switch once turns on the flasher;
pressing twice creates steady illumination. Press the switch again to turn off light.
Warnings
Keep out of reach of children.
Do not stare directly into light when operating.
If unit has not been in use for a long period of time, check battery charge by turning
on the unit. Do store batteries in unit for an extended period of time. Battery life
varies based on brand and type.
This product has been designed for emergency use ONLY. Do not use this
Emergency Light Set as a replacement for a broken taillight. Do not use for other
than intended purposes. Doing so may result in serious injury or property damage.
Questions?
If you have any questions about this product, please contact Team Products International
Customer Service Department at (877) 227-5832, Monday through Friday, 9 AM to 5 PM
Eastern Time or visit us at www.teamproducts.com.
•
•
•
•
Magnets
Back Panel/Battery
Compartment
On/Off Switch
Batteries
The Emergency Light Set requires 8
AA batteries for use of the flashlight.
To load new batteries, remove back
panel, accessing battery compartment.
Then insert 8 new AA batteries in the
position shown on the inside panel.
See diagram below.
Insert 4 AA
Betteries Here
