22601 La Palma Ave., Suite 103, Yorba Linda, CA 92887 Ph: (714) 694-2812 Fax: (714) 694-2815
www.team-orion.com
Specifications
Charge capacity:
4-8 Cell
Power Supply:
220-240V 50Hz AC or 12-13.8V DC
Charge current:
0.5-6.5 Ampere adjustable, pulsed with Delta Peak cut-off
3 steps how to use the Team Orion AC/DC48 charger
Step 1
- Make your choice of power supply:
a)
Charging with AC: Check if the Coltage of the main power outlet is 220-240V/50Hz.
If the Voltage is correct, connect the power cable to the back of the charger and connect
after to the mains power: if done correct the power LED will switch on.
b)
Charging with DC: Connect the connector into the back of the charger. Connect the
crocodile clips to a fully charged 12V car battery or 12-13.8 V power supply, the red cable
to the positive (+) and the black to the negative (-) connection. The power LED will lighten
up if connected correctly.
Never use the AC and DC features together,
this will damage your charger immediately!
Step 2
- Connect the charger with the charge leads to the battery pack that needs to be
charged, be sure to connect red (+) and black (-) correctly.
Step 3
- Set the charger to the desired current and push the start button once. The charger
will start charging the battery.
