Throttle/Brake Linkage
The Muggy is equipped with front and rear
adjustable brakes.
Setup
- Turn on the Transmitter and set the throttle trim to
read "0", which is neutral, on the transmitter screen.
- Turn on the switch in truck.
- Loosen the set screw in the blue adjusting collar
and attach the throttle linkage ball cup to the
carburetor.
- Slide the blue adjusting collar up to the servo
linkage slide and tighten the collar. Do not preload
the collar against the slide.
- Loosen the set screw in the silver collar and attach
the ball cup to the front brake arm located under the
center diff top plate.
- Slide the silver adjusting collar against the spring
and tighten the set screw. Do not preload the collar
against the spring. Ensure the brake arm is lined-up
front to back of the truck.
- Loosen the set screw in the red collar and attach
the ball cup to the rear brake arm located above the
center diff top plate.
- Slide the red adjusting collar against the spring
and tighten the set screw. Do not preload the collar
against the spring. Ensure the brake arm is lined-up
front to back of the truck.
Page 7
Throttle
Brakes
Throttle
Front
Rear
