Team Losi 1/10 HIGHroller, Руководство пользователя

Страница: 13 / 28

13
Receiver
There is no adjustment required of the receiver. Please note the different slots for connection.
Changing Frequencies/Channels
The HIGHroller radio operates on 27MHz AM and has 6 different frequencies/channels available. Simply put, a frequency is like a TV
channel. The transmitter you hold in your hand is like the TV station and the model with the matching crystal is like your TV tuned
exclusively to the channel of that station. The HIGHroller radio is equipped with changeable crystals that allow you to change the
frequency/channel you operate on. This is especially useful when you want to run a group of Losi HIGHrollers at the same time. When
changing crystals/channels, you must always replace the crystals as a matched set with one each going in both the transmitter and
the receiver in the truck. Each of the 6 different channels are numbered and color-coded. Each set includes a unique crystal for the
receiver marked (Rx) and one from the transmitter marked (Tx). The crystals are changed by gently pulling them out, then lining up
the two pins of each new crystal with its socket and carefully pushing them into place. DO NOT force them as damage can occur. If
they do not slide into the socket easily check for bent or misaligned pins.
Channel 1
Brown 26.995MHz (LOSB1094)
Channel 2 Red 27.045MHz (LOSB1095)
Channel 3 Orange 27.095MHz (LOSB1096)
Channel 4 Yellow 27.145MHz (LOSB1097)
Channel 5 Green 27.195MHz (LOSB1098)
Channel 6 Blue 27.255MHz (LOSB1099)
Factory Settings of Radio/ESC
The Electronic Speed Control was calibrated together with the radio system at the factory. When you turn on and run the 1/10
HIGHroller for the first time you may be required to slightly adjust the Throttle Trim. If the vehicle creeps in reverse or in forward just
make a fine adjust to the Throttle Trim knob on the transmitter. Sometimes during the bumps and bounces of transportation the
settings can be slightly altered.