background image

English

English

24

25

NAME 

021 -

channel name 

ON / OFF; 
the via software programmed channel name is displayed 

ROGER 

022 -

Roger Ton

ROGON (On) / ROGOFF (Off) 
activates the roger beep

Note: 
With the optional software T-UP26, the aforementioned and further functions and
settings, e.g. battery saving, roger tone, busy channel lockout, compander, etc.
are programmable. 
For the commercial versions, the tx power is also programmable with the accor-
ding software. 

5-TONE SELECTIVE CALLING

The TeCom-IPX5 contains a 5-tone selective calling function, with single and group
calling, which parameters are to be set via software T-UP26.

General:
Each handheld transceiver can be programmed with one 5-tone selective decode
and nine encodes (1 per channel). It is also possible to manually enter any 5-tone
code via keypad. 
If the transmitted encode matches the programmed decode of the radio, the receiver
displays the ID code, if ANI is activated, and it performs according to the program-
ming, e.g. speaker unmutes, bell rings, an automatic confirmation is sent, etc. 

Note: For proper functioning of the 5-tone selective call, the multi-function key (10) or
(11) has to be programmed with the function 

Option Signal Call

transmitting a programmed 5-tone selective call:

1. Push the according multi-functional key (10) or (11) that is programmed with 

Optional Signal. 

The display shows 

CALL?

.    

2. Select one of the nine 9 possible 5-tone codes by pressing the assigned number 

keys 1 - 9. The code will be displayed.    

2. Push the PTT key (9). 

manual entry of a 5-tone code:

1. Press the 

ENT

key (12) and manually enter the 5-tone selective call with

the keypad. For the letters A-D, please use these keys:

F

key = A; 

PF1 

key = B; 

PF2 

key = C; 

alarm tone key 

= D 

CONNECTION

The TeCom-IPX5 is equipped with a Motorola-compatible
accessory connection (3.5 / 2.5 mm - stereo / stereo) that
can also be used for the data transfer cable to connect to
the software T-UP26. 

For further accessories please check the actual TEAM

product range or web site. 

tecom-ipx5_manual_2:Layout 1  7/25/2014  11:51 AM  Seite 24

Содержание TeCom-IPX5




























Отзывы: