background image

3

USE PRECAUTIONS

SAFETY PRECAUTIONS

Failure to operate your model in a safe and responsible manner may result in injury to yourself, others or damage to 
property around you.

•  Do not use your model on public roads or in areas where you may encounter pedestrians or 

riders.

• Do not operate in a congested area or in crowds.

•  Do not operate in areas where loud noises can disturb others, such as hospitals and residential 

areas.

• Do not operate your model with obstructed line of sight, at night or near water.

•  Your model is radio controlled, it is subject to possible radio interference. Radio interference 

can cause loss of control of your model. Be careful.

• Take care not to injure yourself while using tools to adjust or upgrade your model.

•  Since the model contains small parts, keep out of reach of children while assembling and/or 

disassembling your model.

• If your model becomes stuck against an object, release the throttle and retrieve it by hand

•  Do not continue to apply the throttle when your model is stuck. This may damage the motor 

and/or ESC/Receiver unit.

•  Turn OFF your model and don’t use it if it runs erratically. Please do not use your model again 

until the problem has been solved.

•  Keep the wheels of the model off the ground when checking the operation of the radio equipment.

•  When learning to operate your model, go to an area that has no obstacles that can damage your model.

• Before and after each use, check all the screws on the model.

• To maintain the best performance, check that all moving parts move freely.

Take all necessary precautions before, during and after using your model. You are responsible for the safe as-
sembly, maintenance and use of your model.
In case of any questions, contact your local reseller or contact Team Corally support for assistance.

For your safety, always use wear gloves and goggles when assembling and maintaining your model.
Always take all necessary precautions when handling products (silicone oil, grease, thread lock, cyanolyte glue, fuel) for 
the operation of the model. (Refer to the manufacturer’s instructions)
For your safety, to keep the warranty and obtain the best performance, always use original CORALLY genuine parts.

Contains: LEAD (CAS 7439-92-1) ANTIMONY (CAS 7440-36-0)
WARNING: This product contains a chemical known to the state of California to cause cancer and birth defects or other 
reproductive harm.
CAUTION: CANCER HAZARD 
Contains lead, a listed carcinogen. Lead is harmful if ingested. Wash thoroughly after using.  
DO NOT use product while eating, drinking or smoking.

Содержание Python C-00181

























Отзывы: