SILICONE
OIL
50%
WAIT
TIGHTEN
TIGHTEN
FULLY
5min
FILL
MOVE
UP
3-4x
SLOWL
Y
MOVE
UP
9
MAINTENANCE
Remove the shock absorbers from the vehicle. (4x)
Remove the shock cap.
Drain the oil from the shock absorber.
Fill the shock absorbers with new silicone oil.
Never use any other type of oil.
Use
450cps
silicone oil for
FRONT
Use
400cps
silicone oil for
REAR
.
www. corally.com/Chemicals/Silicone-Oils/
It may be necessary to replace the silicone oil in the shock absorbers every 40 runs.
It depends on how you drive and the type of terrain you drive on.
SHOCK ABSORBER MAINTENANCE
• Pull the Shock shaft
down.
• Fill the shock body with
silicone oil.
• Front : 450cps
Rear : 400cps
• Move the piston up&down
(3-4x) to release the air
bubbles in the silicone
oil.
• Pull the Shock shaft
down.
• Install the shock absorb-
er vertically and let it sit
for a few minutes until
the bubbles rise to the
surface.
• Install the silicone mem-
brane in the shock cap.
• Tighten slightly the
shock cap on the shock
body.
• A little oil will flow out of
the shock absorber.
• Gently move the piston
in upper position.
• The excess will flow out
of the shock absorber.
• Allow the piston in the
upper position.
• Tighten the cap fully but
not too much otherwise
the membrane will be
deformed.
Содержание Dementor C-00165
Страница 1: ...www corally com C 00165_manual V1 ...
Страница 10: ...10 FRONT DRIVE TRAIN EXPLODED VIEW ...
Страница 11: ...11 REAR DRIVE TRAIN EXPLODED VIEW ...
Страница 12: ...12 CHASSIS EXPLODED VIEW ...