Team Blacksheep TBS TANGO 2 Скачать руководство пользователя страница 39

Страница: 39 / 40

TBS Agent X

Download the installer from

team-blacksheep.com/products/prod:agentx

(Windows7/8/10 and macOS) -

no drivers needed to use the application, but an Internet connection is required to download the latest

firmware versions. Click on the three dots in the top right corner and enable the “Include Beta firmware”

checkbox if you like to include beta releases in the available updates.

Turn on the radio, plug in a USB-C cable on the radio. Power for the update is provided via USB. The

software will automatically detect the device and offer you the option to upgrade the firmware if a newer

version is available.

Make sure you use the Agent X version 2.0.33 or later.

When the status indicator is green or orange and says “Connected”, you can upgrade or downgrade the

firmware.

To upgrade the firmware, select the latest version from the drop-down menu and click Update. Rapid

blinking indicates that the process is working and being updated. The process will take about 1 minute.

Check all settings after the process is finished.

Detailed informations on how to use the Agent X can be found here.

Содержание TBS TANGO 2









































Результаты поиска

Содержание TBS TANGO 2

Отзывы:

Похожие инструкции для TBS TANGO 2

Бренды по названию

Популярные бренды

Team Blacksheep TBS TANGO 2, Руководство пользователя

Результаты поиска

Содержание TBS TANGO 2

Отзывы:

Похожие инструкции для TBS TANGO 2

Бренды по названию

Популярные бренды