PRIMARY INSTRUCTIONS
1. Make sure your TV and Dreamcast is turned off
2. Connect your Toro’s Dreamcast AV plug (1) to your console’s AV port on the back.
3. Connect your VGA cable (male to male, not included) between your Toro (3) and your display
(plasma, LCD, monitor etc.) You can also plug Toro to your upscaler or TV via Euro Scart
connector. Scart can deliver both video and stereo audio signals. Standard TVs don’t support
480p through Scart, so you need to set it to 480i (RGB mode) before using. You can enjoy the
480p / RGBS mode with upscalers like the XRGB Mini.
4. Connect your RCA audio cables to your Toro (4 & 5). You can get stereo sound from your TV
or an amplifier for a better gaming experience. You should turn off your stereo system
(amplifier) before connecting your cables to eliminate the risk of damaging your speakers.
5. Adjust the settings (RGB, sync mode/scanlines) you prefer by the help of switches.
6. Turn on your TV and Dreamcast (amplifier too) and enjoy your VGA box with different
settings.
4
