3
Installation Instructions
Important:
KEEP GAME BOX, USER MANUAL, GAME SETUP RULER, AND EXTRA TEMPORARY WALL
HOOKS FOR FUTURE USE.
Game Installation - Option 2
WITH DRYWALL ANCHORS
1. Select wall where Galaxy Stars™ Soccer Game Mat will be hung.
Make sure the selected wall is strong enough to hold the unit,
and located in a room with the dimensions of 8 ft by 12 ft or
larger.
2. Place the Game Hanging Template (GHT) on the wall with
masking tape (
FIGURE E). Make sure holes on top of the GHT
are level and the bottom edge is flush with the floor.
3. Using a 5/16 inch (8mm) drill bit, drill a hole into each of the
dedicated guide dots (
FIGURE F).
4. Once all 4 holes have been drilled, remove the GHT and fold
neatly for future use.
5. Place a plastic anchor into one of the holes and hammer it in
until it is flush with the wall (
FIGURE G). Repeat this step for the
3 remaining anchors.
6. Insert a screw into one of the installed anchors and drill it
halfway in (
FIGURE H). Repeat this step for the 3 remaining
screws.
7. Along the top edge of the playing mat are 4 fabric loops. Hang
each of the 4 loops on it’s own screw. Make sure all screws and
loops are secure before playing.
Game Removal
FOR REMOVABLE WALL HOOKS
1. With one hand, hold the plastic hook in place but do not apply
pressure to the wall (
FIGURE I).
2. With your other hand, pull the adhesive strip tab straight down.
Remember to pull slowly and as straight as possible. Pulling the
tab towards you or on an angle can cause it to snap or damage
your wall (
FIGURE J).
3. Keeping your one hand on the plastic hook and the other
against the wall, slowly stretch the strip down until the plastic
hook releases (
FIGURE K).
GAME HANGING TEMPLATE (GHT)
TEMPLATE SHOULD BE FLUSH WITH FLOOR
GAME HANGING TEMPLATE (GHT)
TEMPLATE SHOULD BE FLUSH WITH FLOOR
Figure E
Figure F
Figure G
Figure H
Figure I
Figure J
Figure K
