PROGRAMMING REMOTES
CCU3 - USER MANUAL
3
1
*Only if using 5-Channel Remote*
Select the channel you wish to programme using the ‘Channel Select’
button on the remote control.
To delete the remote controls stored on the CCU3 control unit’s
memory simply press and hold the ‘Learn’ button for 10-15 seconds
until the red LED flashes.
2
PRESS and HOLD the ‘LEARN’ button on the CCU3 until the buzzer
makes a short sound, then release.
Turn on the power to the CCU3 control unit.
3
Within a few seconds press the ‘STOP’ button on the remote
transmitter.
4
The buzzer will sound twice to confirm the remote transmitter has been
programmed.
5
1 (Open)
(Front)
(Back)
2 (Stop)
3 (Close)
5 (Channel
Display)
6 (Channel
Select)
)
g
o
r
P
(
4
RCU3-RC1
RCU3-RC5
(Front)
(Back)
1 (Open)
2 (Stop)
3 (Close)
)
g
o
r
P
(
4
