Teagle TITAN 6, Инструкция / Перечень запасных частей

Страница: 9 / 44

Figure 3 Correct bed conveyor tension
PTO DRIVELINE
The PTO shafts should be checked regularly and any
broken or damaged guards replaced. All joints should
be checked and replaced if damaged. Replacement
PTO parts including guards are readily available.
The optional ratchet clutch is totally enclosed and
does not require routine maintenance other than
lubrication.
AXLES, WHEELS & TYRES
The axle retaining bolts should have their torque
checked after the first 10 hour ’ s use and then every 50
hours. Table 1 gives the correct torque setting.
Table 1. Axle retaining nut and bolt torque setting
After the first hour ’ s use and then every 50 hours,
check the wheel nuts for tightness. If allowed to work
loose, the rims and wheel studs will become damaged
and it will be impossible to keep the wheel nuts tight.
The wheel nut torque setting is given in Table 2.
Table 2. Wheel nut torque setting
The removal, repair, refitting and inflation of a tyre can
cause accidents and this operation should be carried
out by a specialist tyre repairer.
Tyre inflation should always be carried out in a cage
with all personnel stood to one side, never in front.
When removing and refitting the wheels, ensure that
the machine is securely supported with the use of
correctly rated axle stands positioned on a level firm
surface. When the wheels are removed and
transported, they should be securely restrained and
checked for:
1. Damage to stud holes in the flange
2. Severe rust damage
The maximum inflation pressures for the various sizes
of tyre offered are given in Table 3.
Socket Size
(mm)
Thread
(mm)
Torque
(lb/ft)
Torque
(Nm)
24 M18 x 1.5 332 450
Table 3. The maximum inflation pressures for the sizes of tyre offered
Size Ply Rating Outside Diameter
(mm)
Width
(mm)
Max Inflation
Pressure
16.9 - 30 14 1485 429 2.0 Bar (29 psi)
18.4 - 30 14 1550 467 2.7 Bar (39 psi)
18.4 - 34 14 1650 467 2.5 Bar (36 psi)
6
Socket Size
(mm)
Thread
(mm)
Torque
(lb/ft)
Torque
(Nm)
36 M24 x 3.0 332 450