background image

Telehawk Quick Start Guide page 4

 

BALE RESTRAINT

The position of the bale restraint has an important role on 
how much of the bale is exposed to the crossbeater. The closer 
the bale restraint is to the fan motor the more straw will flow 
through the machine. If you have damp, matted bales we 
suggest moving the bale restraint away from the fan of the 

11

machine and slowing the bed speed down.
To adjust the bale restraint beam remove the three M12 bolts 
located in the holes on both sides of the restraint beam, and 
loosen the fourth bolt in the slot.  Reposition the bale restraint 
beam by aligning the necessary holes, replace and tighten bolts.

             

PERFORMANCE

The blow distance is dependant upon a number of factors. The main factor is the flow of oil to the fan motor. The higher the oil 

flow the greater the blow distance. Keeping the fan motor spinning at high speed is important. Other factors include bed chain 

speed, bale restraint position, bale condition and material type. 

Higher output

 is achieved by a rapid tumbling action of the straw on the bed chain.

12

Содержание Telehawk

Страница 1: ...r at low revs and the fan will instantly start to spin Note To stop the fan motor you will need to stop the hydraulic oil flow Press the power on button when the bluetooth is illuminated Check chute rotation deflector functions work CROSSBEATER BED FORWARD Press the working button to start the crossbeater and bed chain If the bed chain is set to 0 the bed should be stationary Pressing this button ...

Страница 2: ... its side so that the strings are not in contact with the floor Loading round bales To load round bales drive the machine forwards forcing the front lip under the bale Place the chains around the rear of the bale Cut the strings netwrap on the bale as low as possible on the crossbeater side of the bale Crowd the machine rolling the bale into the bale chamber before removing the strings netwrap com...

Страница 3: ...r the bale in the chamber the longer the reverse time of the bed chain is required The reverse time can be increased by pressing the increasing reverse time button and decreased using the decreasing button Guidance table LED lights on control box Round bales 2 lights Rectangular quadrants bales 2 or 3 lights Rectangular hesston bales 3 at first 4 lights 2nd half of bale PRESSURE SWITCH The machine...

Страница 4: ...move the three M12 bolts located in the holes on both sides of the restraint beam and loosen the fourth bolt in the slot Reposition the bale restraint beam by aligning the necessary holes replace and tighten bolts PERFORMANCE The blow distance is dependant upon a number of factors The main factor is the flow of oil to the fan motor The higher the oil flow the greater the blow distance Keeping the ...

Отзывы: