Telehawk Quick Start Guide page 1
A
C
B
D
E
TELEHAWK
QUICK START GUIDE
ATTACHING POWER
CABLE AND HOSES TO
THE TELEHANDLER
Connect the curly cable multi-plug into
the boom bracket socket. Connect the
feed and return hoses on the telehandler
making sure the flow direction is correct.
When you connect the junction box plug
in, you should hear a “click” from the
machine which tells you it has power.
HOW TO GET THE BEST FROM YOUR TELEHAWK
2
FITTING THE CONTROL BOX
IN THE CAB & BLUETOOTH
The control box is supplied with a suction
cup attachment. This should be fitted in the
cab in a suitable position that is convenient
to the operator on a smooth, clean dust
free surface.
The control box requires a 12v supply and
is shipped with a cigarette lighter plug as
standard. If the supply cable is connected
with the wrong polarity the control box will
not switch on.
Plug in the control box in the cab. Once the
bluetooth light has stopped flashing and is
illuminated bluetooth is paired and you are
ready to proceed.
INITIAL START
Set the oil flowing with the loader at low revs
and the fan will instantly start to spin. Note: To
stop the fan motor, you will need to stop the
hydraulic oil flow. Press the “power on” button
when the bluetooth is illuminated. Check
chute rotation & deflector functions work.
CROSSBEATER /
BED FORWARD
Press the working button to start
the crossbeater and bed chain. If the
bed chain is set to ‘0’ the bed should
be stationary. Pressing this button
again will stop the bed chain and
crossbeater.
Stopping the bed will not stop the
fan. To do this the hydraulic flow
must be cut off.
BED CHAIN SPEED
The bed chain speed can be varied
in the cab by twisting the dial
independently of the crossbeater
speed. If the bed is rotating when the
dial is set to “0”, then you need to re-
calibrate the bed speed (see page 20
of the manual).
CROSSBEATER
BED REVERSE
To reverse the machine at any time
press the “crossbeater & bed chain
unloading” button.
SEE THE MANUAL FOR
MORE INFORMATION
ON PAIRING THE DEVICES.
C
D
E
FITTING THE
TELEHAWK ONTO
THE LOADER
Make sure the appropriate loader
brackets are central and secure. Attach
the Telehawk to the loader headstock
engaging the locking mechanism
to prevent the machine detaching.
Carefully crowd up and check there is
clearance between the fan motor cover
and headstock.
1
A
B
