THE QUANTUM II CONTROLS
•
Channel A turns power “on/off” (red LED indicator) and adjusts the volume
of the IR microphone assigned to it. Normally the body-pack transmitter is
assigned to channel A. When the transmitter is turned “on” a green LED
will light, indicating that an IR signal is being received from the transmitter.
•
Channel B also turns power “on/off” and adjusts the volume of the
microphone assigned to it. Normally the handheld microphone is assigned
to channel B. When the transmitter is turned “on” an amber LED will light
indicating an IR signal is being received from the transmitter.
•
Tone control adjusts the tonal quality of the sound. You will feel a center
indent, turn CCW will boost the bass and turning CW will extenuate the
high frequencies.
•
Line input jack (3.5mm) facilitates connecting the output of a DVD, Video
Projector, ipod, computer and amplifying its signal through the Quantum.
The volume can be controlled with the adjacent knob.
•
Line output jack (3.5 mm) provides a composite line level output; it can be
used to connect to a personal FM assistive listening system or as an output
to a recording device. The small knob adjusts the output level to match
input of the device connected.
•
External speaker output connector is located adjacent to the power plug.
An unpowered external speaker can be connected to the Quantum for
additional coverage. A companion unpowered Quantum would be the
speaker of choice.
