TeachLogic Matrix Скачать руководство пользователя страница 9

9

infrared microphones

The infrared microphone/transmitter is comprised of a microphone input, signal processing circuits 

and several emitting diodes that transmit the vocal signal to the sensor.

The microphone/transmitter can be the Sapphire or Handheld. The rechargeable batteries will provide 

6–8 hours of service per charge. Place the microphone/transmitter in the charger for overnight charge 

and it will be ready for another day’s use.

The drop-in battery chargers are specifically designed to recharge lithium & NiMH batteries at an 

optimum rate for Matrixum operating capacity and extended service life. Charger will automatically 

start charging the batteries upon insertion and will shift to a maintenance charge when batteries are 

fully charged.

The  Sapphire’s  vocal  clarity  is  unsurpassed.  Its  high 

level  output  is  achieved  by  the  unidirectional  (Cardioid) 

microphone and a unique free air suspension system. With 

a built-in breath filter, the Sapphire can function as a pass 

around hand mic.

The  strategic  alignment  of  the  emitting  diodes  assures 

reliable  connectivity  throughout  the  room  without  static  or 

drop out.

With  a  tap  on  the  power  button,  the  microphone  is  muted 

for  private  conversation—tap  again  to  restore  to  normal 

operation.  The  auxiliary  input  allows  wireless  playback  of 

your personal music device through the Sapphire. A three 

position slide switch provides selection of normal, medium 

(-3 dB), or low (-6 dB) microphone sensitivity.

features

• 

Elegant design

• 

Only 1.4 oz. including battery

• 

Long life Lithium Ion battery

• 

Rechargeable via USB cable

• 

Battery level indicator – Back 
light under power switch

• 

Momentary mute button, 
backlight blinks in mute mode

• 

Push “on/off” power

• 

Channel “A” or “B” selectable

• 

Three level microphone vol

-

ume switch 

• 

3 voice sensitivity settings 
(Normal, -3dB, -6dB)

• 

Auxiliary input (3.5mm) for 
headset or music device

• 

Wear with a lanyard or slide 
directly on neckline collar

(IRT-60) sapphire transmitter          

Содержание Matrix



























Отзывы: