TeachLogic IMA-520, Руководство по установке

Страница: 19 / 21

Maxim
™
III Specifications
18
Maxim™ III (IMA-520) specs
Receiver Input Infrared FM, 2 wireless mic channels
Modulation Wide-band FM
Reception Frequencies Ch. A: 2.08 MHz | Ch. B: 2.54 MHz
Deviation 10 kHz Nominal, 25 kHz Maximum
De-emphasis 50 µs
Tone Signal 32.768 kHz
Infrared Wavelength 850 nm
External Sensor Input 2, RCA, powered ports
Connectivity Coverage 1,600 sq ft per sensor, up to 2 sensors supported
Total Harmonic Distortion <1% @ 1 kHz
Frequency Response 20 H - 20 kHz, ± 3 dB
Aux line level Inputs 4: 1 dual RCA, 3.5mm
Anti-hum balun present on 1 Aux input for computer
Wired Mic input 1 aux input switchable to mic input
Line Output Lesson Capture: 3.5 mm with gain control - front panel
ALS: 3.5 mm with gain control - rear panel
Page Input 2-pin Phoenix; 25 V or 70 V normal
Page Input Sensitivity 3.6 V min
Security Alert Contact closure (COM, N/O, N/C)
Fire Alarm Contact closure by fire panel mutes audio
Amplifier Output Power 50 W RMS, 2 x 25 W channels
Output Impedance 4 Ω minimum
Equalization 5-band, ±12 dB
S/N Ratio ›65 dB
Speaker Connection 4-pin Phoenix connectors
Charger Output 5 V DC, USB
Power Supply 19 V DC / 6.3 A; CE, CSA and UL listed
Dimensions 8.5” W x 1.75” H x 7.5” D
Weight 2 lb 4 oz
Power Supply (AC-36) specs
Type Regulated Switching Power Supply
Input Voltage 100-240 volts AV, 47-63 Hz
Output Voltage 19 volts DC, 3.43 A
Power Output 65 watts max.