Copyright © TeacherGeek 2006. Only for use with TeacherGeek products.
Body Build
Page 6
™
Copyright © TeacherGeek 2006. Only for use with TeacherGeek products.
F. Bend The Feelers
What’s Needed?
2 Steel Feeler Wires
Pliers
Marker
1”
(2.5cm)
1. Measure, Mark, Hold
2. Bend
3. Smoosh
4. Hold
5. Form
6. Done !!!
Measure and mark 1”
(2.5cm)
from the
end of the wire. Use pliers to hold the
wire as shown.
14.
Create 2 feelers using this process:
Have you made 2 feelers?
They should look like this:
Bend the wire where
it was marked
Smoosh (flatten) the
bend from step 2
Hold the
wire as shown
While holding the wire
with pliers (step 4),
bend the contour shown.
Pliers
This is a top view of a feeler
.
You can use it as a template to
bend your wires (it’
s full size).
