TEACH TECH King Lizard, Руководство по сборке и инструкция

Страница: 3 / 44

1 : 1 1 : 1 1 : 1
Introduction
Mechanical Parts List
Gear With Shaft
Pinion Gear (White)
Tapping Screw
Gear (Red)
Gear (Purple)
Hex Shaft (Middle) Hex Shaft (Long) Hex Shaft (Short)
Gear (White) Gear (Yellow)
QTY
1
5 1 1
1 1 1
QTY
1
QTY
1
QTY
QTY QTY QTY
QTY QTY QTY
2
P4 P3 P2 P1
P5 P6 P7
P8 P9 P10
King Lizard is modeled after Australian Frilled Lizards. When these lizards are surprised or
threatened they exhibit a pretty spectacular display. First it's the wide open, hissing mouth with
sharp little canine teeth. Then comes the big reveal, the neck frills jump from limp to frightening
in a snap. This aggressive behavior is truly a bluff and if you don't run away, the lizard will.
The King Lizard functions with two modes, "Follow-me" and "Escape". With the 2 mode switch,
when the infrared (IR) sensor is activated in the Elude mode, the King Lizard will act startled.
The frill will deploy, jaws gape and LED eyes blaze all before scurrying away to a safe
distance. When the IR sensor is activated in the Follow-me mode, your King Lizard will bluff
the threat (you) with an energetic frill display. If your King Lizard does not sense danger it will
follow you like a pet.
2
Alkaline batteries are
recommended
Tools You May Need
Diagonal Cutter Knife Battery (AAA) x 4 Screwdriver Hammer
Safety Glasses
Important: If any parts are missing or damage, DO NOT RETURN TO THE
RETAILER. E-mail us at support@elenco.com or call (800) 533-2441
•
• Product contains functional edges and sharp points.