TEAC UR-Stream
5
Conventions used in this manual
In this manual, we use the following conventions:
o
SD/SDHC memory cards are called “SD cards”.
o
“USB flash drives” are sometimes called “USB drives”.
o
As necessary, additional information is provided under TIP,
NOTE and CAUTION headings.
TIP
These are tips about how to use the unit.
NOTE
These provide additional explanations and describe special
cases.
ATTENTION
Failure to follow these instructions could result in damage to
equipment or lost data, for example.
V
CAUTION
Failure to follow these instructions could result in injury.
Note about the Reference Manual
This Owner’s Manual explains each of the functions of this unit.
Please see the Reference Manual for detailed information about
each of the functions.
The Reference Manual can be downloaded from the included
USB flash drive and the TEAC Global Site (http://teac-global.com/).
Precautions for placement and use
o
The operating temperature range of this unit is 0–40 °C.
o
Do not install this unit in the following types of locations.
Doing so could make the sound quality worse or cause
malfunction.
Places with significant vibrations
Next to a window or in another location exposed to direct
sunlight
Near heaters or other extremely hot places
Extremely cold places
Very humid or poorly ventilated places
Very dusty places
o
To enable good heat dissipation, do not place anything on
top of the unit.
o
Do not place this unit on top of a power amplifier or other
device that generates heat.
o
When installing this unit on or under a desk, use the included
attachment brackets.
Beware of condensation
Condensation could occur if the unit is moved from a cold place
to a warm place, it is used immediately after a cold room has
been heated or it is otherwise exposed to a sudden temperature
change.
To prevent this, or if this occurs, let the unit sit for one or two
hours at the new room temperature before using it.
Cleaning the unit
Use a dry soft cloth to wipe the unit clean. Do not wipe
with chemical cleaning cloths, thinner, alcohol or other
chemical agents. Doing so could damage the surface or cause
discoloration.
