INITIAL SET-UP
MAINS CONNECTION
Ensure that the mains voltage of your home corresponds to the operating voltage of the unit.
Your unit is ready to be connected to a mains voltage of 220V-240V/50Hz.
AMPLIFIER CONNECTION
Whilst you can listen to your new turntable using the built-in speakers, you may wish to con-
nect it to your existing Hi Fi system. Connect the audio plugs to the AUX input on your mixer or
amplifier using an RCA cable (not supplied).
y
y
Red plug into R/H channel input.
y
y
White plug into L/H channel input.
Playing a record
y
Place the record on the turntable. If required, also place the adaptor on the record spindle.
y
Choose the desired playing speed using the speed selection switch between 33.3, 45 and 78rpm.
y
Turn on the Rotary Power Switch, note that this also controls volume.
y
Release the tone arm lock.
y
Raise the arm with your hand lightly.
y
Place the stylus vertically over the first track of the record, the turntable will start turning auto
-
matically.
y
Lower the stylus slowly onto the record to play.
y
When a record comes to the end, the turntable will stop automatically if the auto-stop switch is
in the ON position. If the switch is in the off position then it will keep revolving until the tone arm
is returned to the tone arm rest.
y
Lift up the tone arm and put it on the rest when finished.
y
Replace the protective cap on the stylus and close the tone arm lock.
y
Turn off the power at mains.
Listening to USB/SD tracks
y
Turn the volume knob in a clockwise direction to switch on the turntable.
y
Use the function selector to select USB/SD mode.
y
Insert the USB/SD card into the correct slot.
y
Wait for 6-10 seconds. Once the unit reads the total tracks, it will auto-play them.
y
Press “FUNCTION” buttonww to convert the USB/SD Tracks. (default for U-disc play)
y
Press “Play/PAUSE SEARCH” to Pause, press again to play.
y
Press “PREV” to play previous track.
y
Press “NEXT” to play next track.
y
Keep pressing “PREV” for 3 seconds to decrease the playback volume of source-disc.
y
Keep pressing “NEXT” to increase the volume.
y
Press “DEL” to delete recorded songs but not original songs in USB or SD card
Note:
1– Without USB / SD card, the default setting is Phono playing.
2– With USB / SD card, the default setting is SD card playing.
1 – Plastic dust cover
2 – Turntable
3 – Adaptor - Use it when playing 45rpm
records with cut out centres.
4 – Tone arm
5 – Tone arm lift lever
6 – On / OFF Phono play Function
selection.
7 – Speed selection - Three speeds for
choice: 33.3, 45, 78 rpm.
8 – Full range loud speaker
9 – Ceramic cartridge with diamond needle
10 – Power on / off switch & volume button
11 –
LED light indicator
12 –
USB slot
1
3 – SD / MMC card slot
14
– PREV button
15
– Play / Pause /Search button
16
– Next button
1
7 – Function button
1
8 – LED display
19 –
RCA Line out jack
PRODUCT DESCRIPTION