background image

5

4

Contents

Read this before attempting any
operations.

<

As the unit may become warm during
operation, always leave sufficient space
around the unit for ventilation.

<

The voltage supplied to the unit should
match the voltage as printed on the rear
panel. If you are in any doubt regarding
this matter, consult an electrician.

<

Choose the installation location of your
unit carefully. Avoid placing it in direct
sunlight or close to a source of heat. Also
avoid locations subject to vibrations and
excessive dust, heat, cold or moisture.

<

Do not place the unit on an
amplifier/receiver.

<

Do not open the cabinet as this might
result in damage to the circuitry or
electrical shock. If a foreign object should
get into the unit, contact your dealer or
service company.

<

When removing the power plug from the
wall outlet, always pull directly on the
plug, never yank the cord.

<

Do not attempt to clean the unit with
chemical solvents as this might damage
the finish. Use a clean, dry cloth.

<

Keep this manual in a safe place for
future reference.

Before Using the Unit

The provided Remote Control Unit allows
the unit to be operated from a distance. 
When operating the remote control unit,
point it towards the remote sensor on the
front panel of the unit. 

<

Even if the remote control unit is
operated within the effective range,
remote control operation may be
impossible if there are any obstacles
between the unit and the remote control.

<

If the remote control unit is operated near
other products which generate infrared
rays, or if other remote control devices
using infrared rays are used near the unit,
it may operate incorrectly. Conversely, the
other products may also operate
incorrectly.

1. Remove the battery compartment cover.

2. Put in the lithium battery (CR2032, 3V).

3. Close the cover.

Battery Replacement

If the distance required between the
remote control unit and main unit
decreases, the battery is exhausted. In this
case, replace the battery with a new one.

Precautions concerning batteries

Do not heat or disassemble batteries and
never dispose of old batteries by throwing
them in a fire.

Remote Control Unit

Battery Installation

Thank you for choosing TEAC. Read this
manual carefully to get the best
performance from this unit.

Important Safety Instructions . . . . . . . . . . 2

Before Using the Unit . . . . . . . . . . . . . . . . 4

Remote Control Unit. . . . . . . . . . . . . . . . . 5

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Unit Functions. . . . . . . . . . . . . . . . . . . . . . 6

Connection. . . . . . . . . . . . . . . . . . . . . . . . 8

Getting Started . . . . . . . . . . . . . . . . . . . . 10

Setting the Clock . . . . . . . . . . . . . . . . . . 11

Basic Operation. . . . . . . . . . . . . . . . . . . . 12

Listening to iPod . . . . . . . . . . . . . . . . . . . 14

Operating iPod . . . . . . . . . . . . . . . . . . . . 15

Listening to an External Source . . . . . . . . 17

Listening to the Radio . . . . . . . . . . . . . . . 18

Preset Tuning . . . . . . . . . . . . . . . . . . . . . 19

Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Troubleshooting . . . . . . . . . . . . . . . . . . . 22

Specifications . . . . . . . . . . . . . . . . . . . . . 23

Shows the digital clock, sleep time or
preset channels.

Lights during muting.

Lights when the sleep function is active.

Lights in preset tuning mode.

Lights when the timer is on.

Shows frequency, volume, date, etc.

When the unit is on, one of these
indicators lights to show the current
source.

G

F

E

D

C

B

A

Display

C

B

A

D

F

G

E

Содержание SR-LXI













Отзывы: