5
Before Use (1)
CAUTION
<
When moving the unit, always lift it by the sides
with both hands .
Correct way to lift
Incorrect way to lift
A light is on the bottom of the
top side.
Do not pick the unit up as shown
in this illustration because this
could cause damage.
<
The voltage supplied to the unit should match
the voltage printed on the supplied AC adapter .
If you are in any doubt regarding this matter,
consult an electrician .
<
Do not open the cabinet as this might result in
damage to the circuitry or electrical shock . If a
foreign object should get into the unit, contact
your dealer or service company .
<
When removing the power plug from the wall
outlet, always pull directly on the plug . Never
yank on the cord .
Placement of the unit
<
Choose the installation location of your unit
carefully . Avoid placing it in direct sunlight or
close to a source of heat . Also avoid locations
subject to vibrations and excessive dust, heat, cold
or moisture .
<
As the unit may become warm during operation,
always leave sufficient space around the unit for
ventilation .
Make sure there is at least 8” (20 cm) of space
above and at least 2” (5 cm) of space on each side
of the unit . Do not place anything on top of the
unit .
<
Do not place the unit on an amplifier or receiver
or any other device that generates heat .
<
When the unit is turned on, switching on the
TV may cause lines to appear on the TV screen,
depending on the wave frequency of the TV
broadcast . This is not a malfunction in the unit
or the TV . If you see such lines, place this unit far
away from the TV set .
Maintenance
If the surface of the unit gets dirty, wipe it with
a soft cloth or use diluted mild liquid soap .
Allow the surface of the unit to dry completely
before using .
For safety, disconnect the power cord from
the socket before cleaning .
<
Never spray liquid directly on this unit .
