18
numeric key on the RCU.
Start Time:
Enter the start time by using the numeric key on the RCU.
End Time:
Enter the end time by using the numeric key on the RCU.
Channel No.:
Select the desired channel No.
After your changes, press
OK
to finish.
The task can be set to inactive or active by using
keys in the schedule.
4. Accessory
4.1 System Information
In this menu, you can view the system software version.
4.2 Factory Default
Select the Factory Default item in the
Accessory menu and press the
OK
key. A
sub-menu will ask for your confirmation. Select
YES to restore factory defaults.
Note:
Reset to Defaults should be used with
care as all programs found will be erased and
Parameters re-set to factory default using this
function.
4.3 System update
* Used for servicing purposes only
Your STB can be upgraded via new software
using the RS232 port.
Updates can be applied via a “slave” STB that
has an upgrade pre-applied, or via a
connection to a PC via the PC serial port.