Troubleshooting
If a fault occurs, first check the list below before taking the radio for repair. If you
cannot solve a problem, please contact TEAC at 1300 553 315.
WARNING
: DO NOT try to repair the unit yourself, as this will void the warranty.
PROBLEM
POSSIBLE CAUSE
SOLUTION
No Sound
Headphones may be connected.
Disconnect your Headphones from the
The Volume might be set to low.
unit.
Adjust the volume level of the radio.
The power cord may not be
Reconnect the power cord firmly
connected correctly/firmly
The buttons on the unit are not
responding
Electrostatic discharge or interference
Turn the unit off and disconnect the
from other electrical equipment
Power Cord. Wait for 5 - 10 seconds,
reconnect and turn the unit back on
Poor radio reception
There is a weak aerial signal or
Reposition the aerial and the unit for
there may be interference from other
the best possible reception. Ensure the
electrical equipment
aerial is connected.
Keep the unit away from other
electrical equipment where possible.
No DAB signal/reception.
You may not have DAB in your area
Rotate antenna and rescan channels.
DAB reception cuts in and out
Move the radio to a position with better
reception.
Visit www.digitalradioplus.com.au to
find out if you have DAB in your area
Specifications
Radio Type
DAB+ / FM / AM Digital Radio
Frequency Range
DAB Band III, 174 - 240 MHz
FM 88 - 108 MHz
AM 540 - 1600 KHz
Battery Operation
6 x 1.5v C Size batteries (not included)
Power Supply
AC Power Input: 230
-240
V, 50Hz
Max Power
Consumption
11W
Unit dimensions
Unit weight
*Dimensions and weight are approximate
*Specifications are subject to change without notice
11
