50
ENGLISH
3.2 Test Write Mode
The test operation is functionally similar to the write operation, except
that the writing of data to the slave disc is simulated. This is useful to
make sure that data can be transferred at the selected rate between
the master and the slave discs.
1.
Press the MODE key until the display shows:
2.
Press ENTER
3.
Insert the disc into the disc tray (original in the MASTER, and the
blank CD-R/CD-RW in the SLAVE drives) and press the ENTER
key. The test operation continues in exactly the same way as the
copy operation described above.
If a CD-RW is inserted into one of the slave drives to which was
written before the following message appears:
ENTER is used to accept while with MODE the test is skipped.
At the beginning of the test the Pico-1 simulates writing the TOC
information. The display shows the same messages, under the
same circumstances, except that the word
Copy
Copy
Copy
Copy
Copy
is replaced by
the word
Test
Test
Test
Test
Test
in all these messages.
3. Modes
Mode select
Mode select
Mode select
Mode select
Mode select
2 Test write: 8X
2 Test write: 8X
2 Test write: 8X
2 Test write: 8X
2 Test write: 8X
Test write: 8X
Test write: 8X
Test write: 8X
Test write: 8X
Test write: 8X
Ready ?
Ready ?
Ready ?
Ready ?
Ready ?
CD-RW in drive1
CD-RW in drive1
CD-RW in drive1
CD-RW in drive1
CD-RW in drive1
Continue?
Continue?
Continue?
Continue?
Continue?
Test Writing
Test Writing
Test Writing
Test Writing
Test Writing
36%
36%
36%
36%
36%
